Command
History
Version 8.3.16.1 Introduced the MXL 10/40GbE Switch IO Module.
Example
Dell#show clock
12:30:04.402 pacific Tue May 22 2012
Dell#
Example
(Detail)
Dell#show clock detail
12:30:26.892 pacific Tue May 22 2012
Time source is RTC hardware
Summer time starts 00:00:00 UTC Wed Mar 14 2012
Summer time ends 00:00:00 pacific Wed Nov 7 2012
Dell#
Related
Commands
clock summer-time recurring — displays the time and date from the switch
hardware clock.
show calendar — displays the time and date from the switch hardware clock.
show ntp associations
Display the NTP master and peers.
Syntax
show ntp associations
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ntp associations command shown in the
following example.
Field Description
(none) One or more of the following symbols could be displayed:
• * means synchronized to this peer.
• # means almost synchronized to this peer.
• + means the peer was selected for possible
synchronization.
• - means the peer is a candidate for selection.
• ~ means the peer is statically configured.
remote Displays the remote IP address of the NTP peer.
ref clock Displays the IP address of the remote peer’s reference clock.
System Time and Date
1293
To Next Page
Loading...
