timer [assert |
hello |
joinprune |
register]
(OPTIONAL) Enter the keyword timer to view PIM timers.
Enter one of the optional parameters:
• assert: to view the assertion timer
• hello: to view the PIM neighbor keepalive timer
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer
Defaults Disabled.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
ip pim bsr-border
Define the border of PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
Syntax
ip pim bsr-border
To return to the default value, use the no ip pim bsr-border command.
Defaults Disabled.
Command
Modes
INTERFACE
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command is applied to the subsequent PIM-BSR. Existing BSR advertisements
are cleaned up by time-out. To clean the candidate RP advertisements, use the
clear ip pim rp-mapping command.
ip pim bsr-candidate
To join the Bootstrap election process, configure the PIM router.
Syntax
ip pim bsr-candidate interface [hash-mask-length] [priority]
To return to the default value, use the no ip pim bsr-candidate command.
Parameters
interface Enter the following keywords and slot/port or number
information:
PIM-Sparse Mode (PIM-SM)
1015
To Next Page
Loading...
