Dell MXL 10GbE - Buffer-Profile (Interface)

buffer-profile (Interface)
Apply a buffer profile to an interface.
Syntax
buffer-profile profile-name
Parameters
profile-name Enter the name of the buffer profile you want to apply to the
interface.
Defaults none
Command
Modes
INTERFACE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
buffer-profile (Configuration) – creates a buffer profile that can be applied to an
interface.
show buffer-profile
Display the buffer profile that is applied to an interface.
Syntax
show buffer-profile {detail | summary} {csf | fp-uplink}
Parameters
detail Display the buffer allocations of the applied buffer profiles.
summary Display the buffer-profiles that are applied to line card port-
pipes in the system.
csf Display the Switch Fabric Processor buffer profiles that you
have applied to line card port-pipes in the system.
fp-uplink Display the Field Processor buffer profiles that you have
applied to line card port-pipes in the system.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show buffer-profile summary fp-uplink
Linecard Port-set Buffer-profile
0 0 test1
4 0 test2
Dell#
470
Debugging and Diagnostics