Dell MXL 10GbE - Advertise Med Streaming-Video

Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
advertise med streaming-video
To advertise streaming video services for broadcast or multicast-based video, configure the system. This
command does not include video applications that rely on TCP buffering.
Syntax
advertise med streaming-video {vlan-id} | {priority-tagged
number}
To return to the default, use the no advertise med streaming-video
{
vlan-id} | {priority-tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
priority-tagged
number
Enter the keywords priority-tagged then the Layer 2
priority. The range is from 0 to 7.
Defaults unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
advertise med video-conferencing
To advertise dedicated video conferencing and other similar appliances that support real-time interactive
video, configure the system.
Syntax
advertise med video-conferencing {vlan-id} | {priority-tagged
number}
878
Link Layer Discovery Protocol (LLDP)