Dell MXL 10GbE - Debug Ip Bgp Ipv6 Unicast Dampening

• [ ] (brackets) matches a range of single-character
patterns.
• ^ (caret) matches the beginning of the input string. (If the
caret is used at the beginning of a sequence or range, it
matches on everything BUT the characters specified.)
• $ (dollar sign) matches the end of the output string.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ip bgp ipv6 unicast dampening
View information on routes being dampened.
Syntax
debug ip bgp ipv6 unicast dampening
To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the S4820T.
debug ip bgp ipv6 unicast peer-group updates
View information about BGP peer-group updates.
Syntax
debug ip bgp ipv6 unicast peer-group peer-group-name updates
[in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast peer-group
peer-group-name updates [in | out] command.
Parameters
peer-group
peer-group-
name
Enter the keywords peer-group then the name of the peer-
group.
IPv6 Border Gateway Protocol (IPv6 BGP)
763