buffer-profile (Configuration)
Create a buffer profile that can be applied to an interface.
Syntax
buffer-profile {fp | csf] profile-name {global {1Q | | 4q}
Parameters
fp Enter the keyword fp to create a buffer profile for the Field
Processor.
csf Enter the keyword csf to create a buffer profile for the
Switch Fabric Processor.
profile-name Create a name for the buffer profile,
global Apply one of two pre-defined buffer profiles to all of the
port-pipes in the system.
1Q Enter the keyword 1Q to choose a pre-defined buffer profile
for single queue (for example, non-QoS) applications.
4Q Enter the keyword 4q to choose a pre-defined buffer profile
for four queue (for example, QoS) applications.
Defaults Dynamic
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0) Changed the default value from global 4Q to Dynamic.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The buffer-profile global command fails if you have already applied a
custom buffer-profile on an interface. Similarly, when you configure
buffer-
profile global, you cannot not apply buffer-profile on any interface.
If the default buffer-profile is active, the Dell OS displays an error message
instructing you to remove the default configuration using the no buffer-
profile global command.
Reload the system for the global buffer-profile to take effect.
Related
Commands
buffer (Buffer Profile) — allocates an amount of dedicated buffer space, dynamic
buffer space, or packet pointers to queues from 0 to 3.
Debugging and Diagnostics
469
To Next Page
Loading...
