encryption-
type
Enter an encryption type for the password that you enter.
• 0 directs the system to store the password as clear text. It
is the default encryption type when using the
password
option.
• 7 to indicate that a password encrypted using a DES
hashing algorithm follows. This encryption type is
available with the
password option only.
• 5 to indicate that a password encrypted using an MD5
hashing algorithm follows. This encryption type is
available with the secret option only, and is the default
encryption type for this option.
password Enter a string up to 32 characters long.
privilege level Enter the keyword privilege then a number from zero (0)
to 15.
role role-name Enter the keyword role followed by the role name to
associate with that user ID.
secret Enter the keyword secret then the encryption type.
Defaults The default encryption type for the password option is 0. The default encryption
type for the secret option is 0.
Command
Modes
CONFIGURATION
Command
History
Version 9.5(0.0) Introduced the support for roles on the MXL 10/40GbE
Switch.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To view the defined user names, use the show running-config user
command.
Related
Commands
password — specifies a password for users on terminal lines.
show running-config — views the current configuration.
userrole
Create user roles for the role-based security model.
Syntax
userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved
role names may not be deleted.
1206
Security
To Next Page
Loading...
