Dell MXL 10GbE - Ftp-Server Topdir

ftp-server topdir
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
Syntax
ftp-server topdir directory
Parameters
directory Enter the directory path.
Defaults The internal flash is the default directory.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
After you enable FTP server functions with the ftp-server enable command,
Dell Networking OS recommends specifying a top-level directory path. Without a
top-level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the MXL 10/40GbE switch IO
module.
ftp-server username — sets a username and password for incoming FTP
connections to the MXL 10/40GbE switch IO module.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type]
password
Parameters
username Enter a text string up to 40 characters long as the user name.
password
password
Enter the keyword password then a string up to 40
characters long as the password. Without specifying an
encryption type, the password is unencrypted.
encryption-
type
(OPTIONAL) After the keyword password, enter one of the
following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Defaults Not enabled.
90
Control and Monitoring