show ip bgp ipv6 unicast flap-statistics
View flap statistics on BGP routes.
Syntax
show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-
length] [filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
filter-list as-
path-name
(OPTIONAL) Enter the keywords filter-list then the
name of a configured AS-PATH ACL.
regexp regular-
expression
Enter a regular expression then use one or a combination of
the following characters to match:
• . = (period) any single character (including a white
space).
• * = (asterisk) the sequences in a pattern (0 or more
sequences).
• + = (plus) the sequences in a pattern (1 or more
sequences).
• ? = (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v)
prior to entering the ? regular expression.
• [ ] = (brackets) a range of single-character patterns.
• ^ = (caret) the beginning of the input string. If the caret is
used at the beginning of a sequence or range, it matches
on everything BUT the characters specified.
• $ = (dollar sign) the end of the output string.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
Syntax
show ip bgp ipv6 unicast inconsistent-as
IPv6 Border Gateway Protocol (IPv6 BGP)
749