Dell MXL 10GbE - Description

Command
Modes
EXEC Privilege
Command
History
Version 9.3(0.0) Introduced on the FC Flex IO module installed in the MXL
10/40GbE Switch.
Usage
Information
If you do not use the statistics parameter, both hardware and DCBx counters
clear.
description
Enter a text description of the DCB policy (PFC input or ETS output).
Syntax
description text
To remove the text description, use the no description command.
Parameters
text Enter the description of the output policy. The maximum is
32 characters.
Defaults none
Command
Modes
• DCB INPUT POLICY
• DCB OUTPUT POLICY
Command
History
Version 9.3(0.0) Introduced on the FC Flex IO module installed in the MXL
10/40GbE Switch.
pfc link-delay
Configure the link delay used to pause specified priority traffic.
Syntax
pfc link-delay value
To remove the link delay, use the no pfc link-delay command.
Parameters
value The range is (in quanta) from 712 to 65535. One quantum is
equal to a 512-bit transmission.
Defaults 45556 quantum
Command
Modes
DCB INPUT POLICY
Command
History
Version 9.3(0.0) Introduced on the MXL 10/40GbE Switch with the FC Flex IO
module.
1396
FC Flex IO Modules