Dell MXL 10GbE - Service-Policy Rate-Limit-Protocols

Related
Commands
qos-policy-input — creates a QoS input policy map.
policy-map-input — creates an input policy map.
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
Syntax
service-policy rate-limit-protocols policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32
characters.
Defaults Not configured.
Command
Modes
CONTROL-PLANE-CPUQOS
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command applies the service-policy based on the type of protocol defined in
the ACL rules.
Create ACL and QoS policies prior to enabling this command.
For CoPP, do not use the keywords cpu-qos when creating qos-policy-input.
Related
Commands
ip access-list extended — creates an extended IP ACL.
mac access-list extended — creates an extended MAC ACL.
qos-policy-input — creates a QoS input policy map.
class-map — creates a QoS class map.
policy-map-input — creates an input policy map.
show cpu-queue rate cp
Display the rates for each queue.
Syntax
show cpu-queue rate cp
Defaults Not configured.
410
Control Plane Policing (CoPP)