Dell MXL 10GbE - Show Boot Selection

Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
BOOT_USER # show boot blc ?
Total 1 possible command found.
Possible command list:
show boot blc
show the boot loop counter value
BOOT_USER # show boot blc
Boot Loop Counter : 10
BOOT_USER #
show boot selection
Display the ROM bootstrap bootflash partition.
Syntax
show boot selection
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
BOOT_USER # show boot selection
ROM BOOTSTRAP SELECTOR PARMETERS:
================================
Next ROM bootstrap set to occur from Bootflash partition A.
Last ROM bootstrap occurred from Bootflash partition B.
BOOT_USER #
show bootflash
Show summary of boot flash information.
Syntax
show bootflash
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
BOOT_USER # show bootflash
GENERAL BOOTFLASH INFO
======================
u-Boot
1309