Dell MXL 10GbE - Show Config

Usage
Information
For two MSTP switches to be within the same MST region, the switches must share
the same revision number.
Related
Commands
msti — maps the VLAN(s) to an MST instance.
name — assigns the region name to the MST region.
show config
View the current configuration for the mode. Only non-default values are shown.
Syntax
show config
Command
Modes
MULTIPLE SPANNING TREE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
Dell(conf-mstp)#
show spanning-tree mst configuration
View the multiple spanning tree configuration.
Syntax
show spanning-tree mst configuration
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Enable the multiple spanning tree protocol prior to using this command.
Example
Dell#show spanning-tree mst configuration
MST region name: CustomerSvc
Revision: 2
MSTI VID
Multiple Spanning Tree Protocol (MSTP)
905