route-map
Enable a route map statement and configure its action and sequence number. This command also places
you in ROUTE-MAP mode.
Syntax
route-map map-name [permit | deny] [sequence-number]
Parameters
map-name Enter a text string of up to 140 characters to name the route
map for easy identification.
permit (OPTIONAL) Enter the keyword permit to set the route map
default as permit. If you do not specify a keyword, the default
is permit.
deny (OPTIONAL) Enter the keyword deny to set the route map
default as deny.
sequence-
number
(OPTIONAL) Enter a number to identify the route map for
editing and sequencing with other route maps. You are
prompted for a sequence number if there are multiple
instances of the route map. The range is from 1 to 65535.
Defaults Not configured.
If you do not define a keyword (permit or deny) for the route map, the permit
action is the default.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module
Usage
Information
Use caution when you delete route maps because if you do not specify a sequence
number, all route maps with the same map-name are deleted when you use the no
route-map map-name command.
Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related
Commands
show config2 — displays the current configuration.
set automatic-tag
To automatically compute the tag value of the route, configure a filter.
Syntax
set automatic-tag
To return to the default, use the no set automatic-tag command.
Access Control Lists (ACL)
207
To Next Page
Loading...
