Dell MXL 10GbE - Redistribute

Defaults Not configured.
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Although the passive interface does not send or receive routing updates, the
network on that interface still includes in RIP updates sent using other interfaces.
Related
Commands
neighbor — enables RIP for a specified network.
network — defines a neighbor.
redistribute
Redistribute information from other routing instances.
Syntax
redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static}
command.
Parameters
connected Enter the keyword connected to specify that information
from active routes on interfaces is redistributed.
static Enter the keyword static to specify that information from
static routes is redistributed.
Defaults Not configured.
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate
command.
Related
Commands
default-information originate — generates a default route for RIP traffic.
1124
Routing Information Protocol (RIP)