Dell MXL 10GbE - Mac Learning-Limit Learn-Limit-Violation

show mac learning-limit — displays MAC learning-limit configuration.
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown} command.
Parameters
log Enter the keyword log to generate a syslog message on a
learning-limit violation.
shutdown Enter the keyword shutdown to shut down the port on a
learning-limit violation.
Defaults none
Command
Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit — displays details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation
command, then the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
850
Layer 2