second position indicates that the target is the internal Flash. The source is on a
secure server running SSH, so you are prompted for the user datagram protocol
(UDP) port of the SSH server on the remote host.
Example
Dell#copy scp: flash:
Address or name of remote host []: 10.11.199.134
Port number of the server [22]: 99
Source file name []: test.cfg
User name to login remote host: admin
Password to login remote host:
Destination file name [test.cfg]: test1.cfg
Related
Commands
cd – changes the working directory.
copy running-config startup-config
Copy running configuration to the startup configuration.
Syntax
copy running-config startup-config {duplicate}
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command is useful for quickly making a changed configuration on one chassis
available on external flash in order to move it to another chassis.
delete
Delete a file from the flash. After deletion, files cannot be restored.
Syntax
delete flash: ([flash://]filepath) usbflash
([usbflash://]filepath)
Parameters
flash-url Enter the following location and keywords:
• For a file or directory on the internal Flash, enter
flash:// then the filename or directory name.
• For a file or directory on an external USB drive, enter
usbflash:// then the filename or directory name.
no-confirm (OPTIONAL) Enter the keywords no-confirm to specify that
the Dell Networking OS does not require user input for each
file prior to deletion.
File Management
61
To Next Page
Loading...
