Dell MXL 10GbE - Maximum-Paths

Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
maximum-paths
Enable the software to forward packets over multiple paths.
Syntax
maximum-paths number
To disable packet forwarding over multiple paths, use the no maximum-paths
command.
Parameters
number Specify the number of paths. The range for OSPFv2 is from 1
to 16. The default for OSPFv2 is 4 paths. The range for
OSPFv3 is from 1 to 64. The default for OSPFv3 is 8 paths.
Defaults 4
Command
Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command
History
Version 9.2(0.0) Added support for OSPFv3.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
mib-binding
Enable this OSPF process ID to manage the SNMP traps and process SNMP queries.
Syntax
mib-binding
To mib-binding on this OSPF process, use the no mib-binding command.
Defaults none.
Command
Modes
ROUTER OSPF
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Open Shortest Path First (OSPFv2 and OSPFv3)
945