Dell MXL 10GbE - Description (for Fcoe Maps)

description (for FCoE maps)
In an FCoE map, add a text description of the FCoE and FC parameters used to transmit storage traffic
over an M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module NPIV proxy gateway in a
converged fabric.
M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module
Syntax
description text
Parameters
text Enter a maximum of 32 characters.
Defaults None
Command
Modes
FCOE MAP
Command
History
Version 9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
Usage
Information
The text description is displayed in show fcoe-map command output.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
fabric
Apply an FCoE map on a fabric-facing Fibre Channel (FC) port.
M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module
Syntax
fabric map-name
Parameters
map-name Maximum: 32 alphanumeric characters.
Defaults None
Command
Modes
INTERFACE FIBRE_CHANNEL
Command
History
Version 9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE
Switch with the FC Flex IO module.
Usage
Information
An FCoE map is a template used to map FCoE and FC parameters in a converged
fabric. An FCoE map is used to virtualize upstream FC ports on an M I/O
Aggregator and MXL 10/40GbE Switch with the FC Flex IO module NPIV proxy
1406
FC Flex IO Modules