Dell MXL 10GbE - 11 Control Plane Policing (Copp)

11
Control Plane Policing (CoPP)
The CoPP commands are supported on the Dell Networking MXL 10/40GbE Switch IO Module.
control-plane-cpuqos
To manage control-plane traffic, enter control-plane mode and configure the switch.
Syntax
control-plane-cpuqos
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32
characters.
Defaults Not configured.
Command
Modes
CONTROL-PLANE-CPUQOS
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Create a policy-map by associating a queue number with the qos-policy.
Create QoS policies prior to enabling this command.
For CoPP, do not use the keywords cpu-qos when creating qos-policy-input.
Control Plane Policing (CoPP)
409