Dell MXL 10GbE - Show Ip Ssh Rsa-Authentication

show ip ssh rsa-authentication
Display the authorized-keys for the RSA authentication.
Syntax
show ip ssh rsa-authentication {my-authorized-keys}
Parameters
my-
authorized-
keys
Display the RSA authorized keys.
Defaults none
Command
Modes
EXEC
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command displays the contents of the flash:/ADMIN_DIR/ssh/
authorized-keys.username file.
Example
Dell#show ip ssh rsa-authentication my-authorized-keys
ssh-rsa
AAAAB3NzaC1yc2EAAAABIwAAAIEAyB17l4gFp4r2DRHIvMc1VZd0Sg5GQxRV1y1
X1JOMeO6Nd0WuYyzrQMM
4qJAoBwtneOXfLBcHF3V2hcMIqaZN+CRCnw/
zCMlnCf0+qVTd1oofsea5r09kS0xTp0CNfHXZ3NuGCq9Ov33m9+U9tMwhS8vy8A
VxdH4x4km3c3t5Jvc=
freedom@poclab4
Dell#
Related
Commands
Xip ssh rsa-authentication (Config) — configures the RSA authorized keys.
show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
Parameters
command Enter the command’s keywords to assign the command to a
certain access level. You can enter one or all of the
keywords.
mode mode Enter keyword then one of the following modes.
• configure
• exec
Security
1197