Dell MXL 10GbE - Show File-Systems

Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show file flash://startup-config
! Version E8-3-16-29
! Last configuration change at Thu Apr 26 19:19:02 2012 by
default
! Startup-config last updated at Thu Apr 26 19:19:04 2012 by
default
!
boot system stack-unit 0 primary system: A:
boot system stack-unit 0 secondary tftp://10.11.200.241/dt-
m1000e-5-c2
boot system gateway 10.11.209.254
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 3
redundancy disable-auto-reboot stack-unit 4
redundancy disable-auto-reboot stack-unit 5
!
service timestamps log datetime
logging coredump stack-unit all
!
hostname FTOS
--More--
Related
Commands
format flash — Erases all the existing files and reformats the filesystem in the
internal flash memory.
show file-systems — displays information about the file systems on the system.
show file-systems
Display information about the file systems on the system.
Syntax
show file-systems
Command
Modes
EXEC Privilege
Command
History
Version
8.3.16.0
Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
2143281152 2000936960 FAT32 USERFLASH rw flash:
15848660992 831594496 FAT32 USBFLASH rw usbflash:
- - - network rw ftp:
- - - network rw tftp:
File Management
67