Dell MXL 10GbE - Show Crypto Ipsec Policy

Parameters
name Enter the name of the transform set.
Command
Modes
EXEC
Command
History
Version 9.2(0.2) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf)#do show crypto ipsec transform-set
Transform-Set Name : ts1
Transform-Set refCnt : 0
AH Transform : md5
ESP Auth Transform :
ESP Encry Transform :
Dell(conf)#
show crypto ipsec policy
Display the crypto policy configuration.
Syntax
show crypto ipsec policy name
Parameters
name Enter the name for the crypto policy set.
Command
Modes
EXEC
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show crypto ipsec policy
Policy name : West
Policy refcount : 1
Sequence Num : 10
SA Mode : IPSEC-MANUAL
Transform-Set Name : dallas
Peer IP Address :
Inbound AH SPI : 0
Inbound ESP Auth SPI : 0
Inbound ESP Encry SPI : 256
Inbound AH Key : [0]::
Inbound ESP Auth Key : [0]::
Inbound ESP Encry Key :
[96]::a5b6b42009d47895b420a5b6789509d4b420a5b6789509d4b420a5b67
89509d4b420a5b6789509d4b420a5b6789509d4
Outbound AH SPI : 0
Outbound ESP Auth SPI : 0
Outbound ESP Encry SPI: 257
Outound AH Key : [0]::
Outound ESP Auth Key : [0]::
Outound ESP Encry Key :
[96]::a5b6b42009d47895b420a5b6789509d4b420a5b6789509d4b420a5b67
89509d4b420a5b6789509d4b420a5b6789509d4
Internet Protocol Security (IPSec)
661