Dell MXL 10GbE - Show Ip Bgp Ipv6 Unicast

neighbor 4000::33 no shutdown
neighbor 4000::60 remote-as 18508
neighbor 4000::60 no shutdown
neighbor 9000::1:2 remote-as 640
no neighbor 9000::1:2 activate
neighbor 9000::1:2 no shutdown
!
Dell#
show ip bgp ipv6 unicast
View the current BGP information.
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-
prefixes]]
Paramters
network (OPTIONAL) Enter the network address (in dotted decimal
format) of the BGP network to view information only on that
network.
network-mask (OPTIONAL) Enter the keywords network mask (in slash
prefix format) of the BGP network address.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
When you enable the bgp non-deterministic-med command, the show ip
bgp command output for a BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specific cluster.
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Paramters
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command
Modes
• EXEC
• EXEC Privilege
IPv6 Border Gateway Protocol (IPv6 BGP)
745