Dell MXL 10GbE - Ignore Enable Password

default-gateway - set the default gateway ip address
enable [user|admin]
change access privilege level
help
display help menu
-(36%)-Use <CR> to continue, q to stop:
BOOT_USER #
ignore enable password
Ignore the enabled password.
Syntax
ignore enable-password
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ignore startup config
Ignore the system startup configuration.
Syntax
ignore startup-config
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
interface management ethernet ip address
Set the management port IP address and mask.
Syntax
interface management ethernet ip address <ip/mask>
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
u-Boot
1307