Dell MXL 10GbE - Show Run Iscsi

Example
Dell# show isci session detailed
Session 0 :
---------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCPPort ID
10.10.0.44 33345 10.10.0.101 3260 0
Session 1 :
----------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCPPort ID
10.10.0.53 33432 10.10.0.101 3260 0
Related
Commands
• show iscsi — displays the currently configured iSCSI settings.
• show iscsi sessions — displays information about active iSCSI sessions on the
switch.
• show run iscsi — shows run iscsi.
show run iscsi
Display all globally configured non-default iSCSI settings in the current session.
Syntax
show run iscsi
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
• show iscsi — displays the currently configured iSCSI settings.
• show iscsi sessions — show iscsi session — displays detailed information about
active iSCSI sessions on the switch.
• show iscsi sessions detailed — displays detailed information on active iSCSI
sessions on the switch.
iSCSI Optimization
791