Dell MXL 10GbE - Show Ipv6 Pim Bsr-Router

Defaults 10 kbps
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
PIM leaf routers join the shortest path tree immediately after the first packet arrives
from a new source.
show ipv6 pim bsr-router
View information on the Bootstrap router (v2).
Syntax
show ipv6 pim bsr-router
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Example
Dell#show ipv6 pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (v2)
BSR address: 14::2
Uptime: 00:02:54, BSR Priority: 0, Hash mask length: 126
Next bootstrap message in 00:00:06
This system is a candidate BSR
Candidate BSR address: 14::2, priority: 0, hash mask length:
126
Dell
show ipv6 pim interface
Display IPv6 PIM enabled interfaces.
Syntax
show ipv6 pim interface
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
1040
PIM-Sparse Mode (PIM-SM)