Dell MXL 10GbE - Default-Vlan Disable

default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly
configured as a member of another VLAN.
Defaults Enabled.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The no default vlan disable command is not listed in the running-
configuration, but when the default VLAN is disabled, default-vlan disable is
listed in the running-configuration.
name
Assign a name to the VLAN.
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name Enter up to 32 characters as the name of the VLAN.
Defaults Not configured.
Command
Modes
INTERFACE VLAN
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To display information about a named VLAN, enter the show vlan command with
the name parameter or the show interfaces description command.
Related
Commands
description — assigns a descriptive text string to the interface.
interface vlan — configures a VLAN.
show vlan — displays the current VLAN configurations on the switch.
858
Layer 2