Dell MXL 10GbE - Interface te; Show Storm-Control Multicast

Example
Dell#show storm-control broadcast tengigabitethernet 3/24
Broadcast storm control configuration
Interface Direction Packets/Second
----------------------------------------
TenGig 3/24 Ingress 1000
Dell#
show storm-control multicast
Display the storm control multicast configuration.
Syntax
show storm-control multicast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display
the interface specific storm control configuration:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/ port information.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show storm-control multicast gigabitethernet 1/0
Multicast storm control configuration
Interface Direction Packets/Second
-----------------------------------------
Gi 1/0 Ingress 5
Dell#
show storm-control unknown-unicast
Display the storm control unknown-unicast configuration.
Syntax
show storm-control unknown-unicast [interface]
Storm Control
1265