Dell MXL 10GbE - Yellow; Dei Honor

dei honor
Honor the incoming DEI value by mapping it to a system drop precedence. Enter the command once for
0 and once for 1.
Syntax
dei honor {0 | 1} {green | red | yellow}
Parameters
0 | 1 Enter the bit value you want to map to a color.
green | red |
yellow
Choose a color:
• Green: High priority packets that are the least preferred
to be dropped.
• Yellow: Lower priority packets that are treated as best-
effort.
• Red: Lowest priority packets that are always dropped
(regardless of congestion status).
Defaults Disabled; Packets with an unmapped DEI value are colored green.
Command
Modes
INTERFACE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
You must first enable DEI for this configuration to take effect.
Related
Commands
dei enable — enables DEI.
dei mark
Set the DEI value on egress according to the color currently assigned to the packet.
Syntax
dei mark {green | yellow} {0 | 1}
Parameters
0 | 1 Enter the bit value you want to map to a color.
green | yellow Choose a color:
• Green: High priority packets that are the least preferred
to be dropped.
• Yellow: Lower priority packets that are treated as best-
effort.
Defaults All the packets on egress are marked with DEI 0.
VLAN Stacking
1323