Row Heading Description
CPU Lists which CPU the entries are stored on.
Example
(Summary)
#show arp summary
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
3 0 3 CP
Dell
Related
Commands
ip local-proxy-arp — enables/disables Layer 3 communication in secondary VLANs.
switchport mode private-vlan — sets PVLAN mode of the selected port.
show arp retries
Display the configured number of ARP retries.
Syntax
show arp retries
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Related
Commands
arp retries — sets the number of ARP retries in case the system does not receive an
ARP reply in response to an ARP request.
show hosts
View the host table and DNS configuration.
Syntax
show hosts
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show hosts command in the following example.
638
IPv4 Routing
To Next Page
Loading...
