Dell MXL 10GbE - Link-Bundle-Monitor Enable

Parameters
percent Indicate the threshold value when traffic distribution starts
being monitored on an ECMP link bundle. The range is from
1 to 90%. The default is 60%.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
link-bundle-monitor enable
Provides a mechanism to enable monitoring of traffic distribution on an ECMP link bundle.
Syntax
link-bundle-monitor enable
To exit from ECMP group mode, use the exit command.
Command
Modes
• ECMP-GROUP
• PORT-CHANNEL INTERFACE
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
show config
Display the ECMP configuration.
Syntax
show config
Command
Modes
CONFIGURATION-ECMP-GROUP
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Equal Cost Multi-Path (ECMP)
509