Dell MXL 10GbE - Version

Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
If you change the timers on one router, also synchronize the timers on all routers
in the RIP domain.
version
Specify either RIP version 1 or RIP version 2.
Syntax
version {1 | 2}
To return to the default version setting, use the no version command.
Parameters
1 Enter the keyword 1 to specify RIP version 1.
2 Enter the keyword 2 to specify RIP version 2.
Defaults The system sends RIPv1 and receives RIPv1 and RIPv2.
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
ip rip receive version — sets the RIP version the interface receives.
ip rip send version — sets the RIP version the interface sends.
Routing Information Protocol (RIP)
1129