Dell MXL 10GbE - Show System Stack-Unit Stack-Group

1/53 2/49
2/33 0/37
2/37 1/33
2/49 1/53
2/53 0/45
Related
Commands
• redundancy disable-auto-reboot — resets the designated stack member.
• show hardware stack-unit — displays the data plane or management plane
input and output statistics of the designated component of the designated
stack member.
• show system — displays the current status of all stack members or a specific
member.
show system stack-unit stack-group
Display the stack-groups present/configured for a MXL 10/40GbE switch stack unit.
Syntax
show system stack-unit unit-number stack-group [configured]
Parameters
unit number
<0–5>
Number of the member stack unit. The valid values are from
0 to 5. The default is 0.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
• reload — reboots the system.
• show system — displays the current status of all stack members or a specific
member.
stack-unit stack-group
Configure a 40GbE port for stacking mode.
Syntax
stack-unit unit number stack-group group number
Parameters
unit number
<0–5>
Number of the member stack unit. The valid values are from
0 to 5.
group number
<0–5>
Number of the stacked port on the unit. The valid values are
from 0 to 5.
1260
Stacking