Dell MXL 10GbE - Ip Ssh Pub-Key-File

ip ssh pub-key-file
Specify the file used for host-based authentication.
Syntax
ip ssh pub-key-file {WORD}
Parameters
WORD Enter the file name for the host-based authentication.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command specifies the file used for the host-based authentication. The
creates/ file overwrites the flash://ADMIN_DIR/ssh/knownhosts file and
deletes the user-specified file. Even though this command is a global configuration
command, it does not appear in the running configuration because you only need
to run this command once.
The file contains the OpenSSH-compatible public keys of the host for which host-
based authentication is allowed. An example known host file format:
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui
+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t
ReG1o8AxLi6+S4hyEMqHzkzBFNVqHzpQc
+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEn WIMPJi0ds=
ashwani@poclab4
NOTE: For rhostfile and pub-key-file, the administrator must FTP the
file to the chassis.
Example
Dell#conf
Dell(conf)# ip ssh pub-key-file flash://knownhosts
Dell(conf)#
Related
Commands
show ip ssh client-pub-keys — displays the client-public keys used for the host-
based authentication.
1188
Security