Dell MXL 10GbE - Bgp Bestpath As-Path Ignore

Usage
Information
Before enabling this feature, enable the enable bgp four-octet-as-
supportcommand. If you disable the four-octect-support command after
using dot or dot+ format, the AS numbers revert to asplain text.
When you apply an asnotation, it is reflected in the running-configuration. If you
change the notation type, the running-config updates dynamically and the new
notation shows.
Example
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asdot
Dell(conf-router_bgp)#ex
Dell(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asdot+
Dell(conf-router_bgp)#ex
Dell(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot+
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asplain
Dell(conf-router_bgp)#ex
Dell(conf)#do show run |grep bgp
router bgp 1
bgp four-octet-as-support
Dell(conf)#
Related
Commands
bgp four-octet-as-support — enables 4-byte support for the BGP process.
bgp bestpath as-path ignore
Ignore the AS PATH in BGP best path calculations.
Syntax
bgp bestpath as-path ignore
To return to the default, enter the no bgp bestpath as-path ignore
command.
Defaults Disabled (that is, the software considers the AS_PATH when choosing a route as
best).
Command
Modes
ROUTER BGP
314
Border Gateway Protocol IPv4 (BGPv4)