Dell MXL 10GbE - Show Debugging

Related
Commands
debug cpu-traffic-stats — enables CPU traffic statistics for debugging.
show debugging
View a list of all enabled debugging processes.
Syntax
show debugging
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show debug
Generic IP: (Access List: test)
IP packet debugging is on for (Access List: test)
TenGigabitEthernet 0/16
ICMP packet debugging is on for
TenGigabitEthernet 0/16
OSPF:1
OSPF packet debugging is on
DHCP:
DHCP debugging is on
Dell#
show environment
View system component status (for example, temperature or voltage).
Syntax
show environment [all | stack-unit unit-id]
Parameters
all Enter the keyword all to view all components.
stack-unit unit-
id
Enter the keyword stack-unit then the unit-id to display
information on a specific stack member. The range is from 0
to 5.
thermal sensor Enter the keywords thermal-sensor to view all
components.
Command
Modes
• EXEC
• EXEC Privildge
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
104
Control and Monitoring