Dell MXL 10GbE - Clear Ip Bgp Dampening

in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out (OPTIONAL) Enter the keyword out to activate only
outbound policies.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
bgp recursive-bgp-next-hop — disables next-hop resolution through other routes
learned by the BGP.
bgp soft-reconfig-backup — turns on BGP Soft Reconfiguration.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
ip-address
mask
(OPTIONAL) Enter an IP address in dotted decimal format
and the prefix mask in slash format (/x) to clear dampening
information only that BGP neighbor.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
After you enter this command, the software deletes the history routes and returns
the suppressed routes to the Active state.
clear ip bgp flap-statistics
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Syntax
clear ip bgp flap-statistics [ip-address mask | filter-list as-
path-name | regexp regular-expression]
Parameters
ip-address
mask
(OPTIONAL) Enter an IP address in dotted decimal format
and the prefix mask in slash format (/x) to reset only that
prefix.
Border Gateway Protocol IPv4 (BGPv4)
329