Dell MXL 10GbE - Vlan Max-Age

vlan max-age
To maintain configuration information before refreshing that information, set the time interval for the
PVST+ bridge.
Syntax
vlan vlan-range max-age seconds
To return to the default, use the no vlan max-age command.
Parameters
vlan vlan-range Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
max-age
seconds
Enter the keywords max-age then the time interval, in
seconds, that the system waits before refreshing
configuration information. The range is from 6 to 40
seconds. The default is
20 seconds.
Defaults 20 seconds
Command
Modes
CONFIGURATION (conf-pvst)
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
vlan bridge-priority — sets the bridge-priority value.
vlan forward-delay — changes the time interval before the system transitions to the
forwarding state.
vlan hello-time — changes the time interval between BPDUs.
show spanning-tree pvst — displays the PVST+ configuration.
Per-VLAN Spanning Tree Plus (PVST+)
1071