Dell MXL 10GbE - Default-Metric

metric metric-
value
(OPTIONAL) Enter the keyword metric then a number as
the metric value. The range is from 1 to 16. The default is 1.
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of a configured route-map.
Defaults Disabled. Metric: 1.
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The default route must be present in the switch routing table for the default-
information originate command to take effect.
default-metric
Change the default metric for routes. To ensure that all redistributed routes use the same metric value,
use this command with the redistribute command.
Syntax
default-metric number
To return the default metric to the original values, use the no default-metric
command.
Parameters
number Specify a number. The range is from 1 to 16. The default is 1.
Defaults 1
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command ensures that route information being redistributed is converted to
the same metric value.
Related
Commands
redistribute — allows you to redistribute routes learned by other methods.
description
Enter a description of the RIP routing protocol.
Syntax
description {description}
Routing Information Protocol (RIP)
1115