Usage
Information
The administrative distance indicates the trust value of incoming packets. A low
administrative distance indicates a high trust rate. A high value indicates a lower
trust rate. For example, a weight of 255 is interpreted that the routing information
source is not trustworthy and should be ignored.
distribute-list in
Filter network prefixes received in updates.
Syntax
distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-
name in [interface] command.
Parameters
prefix-list-
name
Specify the prefix list to filter prefixes in routing updates.
interface (OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
Defaults Not configured.
Command
Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
• distribute-list out — suppresses networks from being advertised in updates.
• redistribute — redistributes routes from one routing domain to another routing
domain.
Intermediate System to Intermediate System (IS-IS)
801
To Next Page
Loading...
