Dell MXL 10GbE - Page 1153

Parameters
system Enter the keyword system to send accounting information
of any other AAA configuration.
exec Enter the keyword exec to send accounting information
when a user has logged in to EXEC mode.
commands
{level| role
role-name}
Enter the keyword command then a privilege level for
accounting of commands executed at that privilege level or
enter the keyword role then the role name for accounting
of commands executed by a user with that user role.
name | default Enter one of the following:
• For name, enter a user-defined name of a list of
accounting methods.
• For default, the default accounting methods used.
start-stop Enter the keywords start-stop to send a “start accounting”
notice at the beginning of the requested event and a “stop
accounting” notice at the end of the event.
wait-start Enter the keywords wait-start to ensure that the TACACS
+ security server acknowledges the start notice before
granting the user’s process request.
stop-only Enter the keywords stop-only to instruct the TACACS+
security server to send a “stop record accounting” notice at
the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for
accounting. The Dell Networking OS currently supports only
TACACS+ accounting.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.5(0.0) Introduced the support for roles on the MXL 10/40GbE
Switch.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
In the example above, TACACS+ accounting is used to track all usage of EXEC
command and commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for
example, use the aaa accounting command 1 command.
Example
Dell(conf)# aaa accounting exec default start-stop tacacs+
Dell(conf)# aaa accounting command 15 default start-stop tacacs
+
Dell(config)#
Security
1153