To return to the default setting, use the no aaa authentication login
{method-list-name | default} command.
Parameters
method-list-
name
Enter a text string (up to 16 characters long) as the name of a
user-configured method list that can be applied to different
lines.
default Enter the keyword default to specify that the method list
specified is the default method for all terminal lines.
method Enter one of the following methods:
• enable: use the password the enable password
command defines in CONFIGURATION mode.
• line: use the password the password command defines
in LINE mode. Not available if role-only is in use.
• none: no authentication. Not available if role-only is in
use.
• radius: use the RADIUS servers configured with the
radius-server host command.
• tacacs+: use the TACACS+ servers configured with the
tacacs-server host command.
... method4 (OPTIONAL) Enter up to four additional methods. In the
event of a “no response” from the first method, the system
applies the next configured method (up to four configured
methods).
Defaults Not configured (that is, no authentication is performed).
Command
Modes
CONFIGURATION
Command
History
Version 9.5(0.0) Introduced the support for role on the MXL 10/40GbE
Switch.
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
By default, the locally configured username password is used. If you configure aaa
authentication login default, the system uses the methods this command
defines for login instead.
Methods configured with the aaa authentication login command are
evaluated in the order they are configured. If users encounter an error with the first
method listed, the Dell Networking OS applies the next method configured. If users
fail the first method listed, no other methods are applied. The only exception is the
local method. If the user’s name is not listed in the local database, the next method
is applied. If the correct user name/password combination is not entered, the user
is not allowed access to the switch.
Security
1163
To Next Page
Loading...
