command is similar to the copy running-config
startup-config command.
terminal Enter the keyword terminal to copy the current running
configuration to the terminal. This command is similar to the
show running-config command.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The write memory command saves the running-configuration to the file labeled
startup-configuration. When using a LOCAL CONFIG FILE other than the startup-
config not named “startup-configuration,” the running-config is not saved to that
file; use the copy command to save any running-configuration changes to that
local file.
124
Control and Monitoring
To Next Page
Loading...
