Dell MXL 10GbE - Page 1420

Field Description
FCoE MAC Fabric-provided MAC address (FPMA). The FPMA consists of
the FC-MAP value in the FCoE map and the FC-ID provided
by the fabric after a successful FLOGI. In the FPMA, the most
significant bytes are the FC-MAP; the least significant bytes
are the FC-ID.
FC-ID FC port ID provided by the fabric.
LoginMethod Method used by the server CNA to log in to the fabric; for
example, FLOGI or FDISC.
Secs Number of seconds that the fabric connection is up.
State Status of the fabric connection: logged in.
Example
ENode[0]:
ENode MAC : 00:10:18:f1:94:21
ENode Intf : Te 0/12
FCF MAC : 5c:f9:dd:ef:10:c8
Fabric Intf : Fc 0/5
FCoE Vlan : 1003
Fabric Map : fid_1003
ENode WWPN : 20:01:00:10:18:f1:94:20
ENode WWNN : 20:00:00:10:18:f1:94:21
FCoE MAC : 0e:fc:03:01:02:01
FC-ID : 01:02:01
LoginMethod : FLOGI
Secs : 5593
Status : LOGGED_IN
ENode[1]:
ENode MAC : 00:10:18:f1:94:22
ENode Intf : Te 0/13
FCF MAC : 5c:f9:dd:ef:10:c9
Fabric Intf : Fc 0/0
FCoE Vlan : 1003
Fabric Map : fid_1003
ENode WWPN : 10:00:00:00:c9:d9:9c:cb
ENode WWNN : 10:00:00:00:c9:d9:9c:cd
FCoE MAC : 0e:fc:03:01:02:02
FC-ID : 01:02:01
LoginMethod : FDISC
Secs : 5593
Status : LOGGED_IN
Related
Commands
dcb-map— creates a DCB map to configure DCB parameters on Ethernet ports
that support converged Ethernet traffic.
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
1420
FC Flex IO Modules