Dell MXL 10GbE - Page 467

dynamic Enter the keyword dynamic to configure the amount of
dynamic buffer space per Field Processor.
packets-
pointers
Enter the keywords packets-pointers to configure the
number of packet pointers per queue.
queue0
number
Enter the keyword queue0 and the number to allocate an
amount of buffer space or packet pointers to Queue 0.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
• Packet Pointer Range: 0 to 2047.
queue1 number Enter the keyword queue1 and the number to allocate an
amount of buffer space or packet pointers to Queue 1.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
• Packet Pointer Range: 0 to 2047.
queue2
number
Enter the keyword queue2 and the number to allocate an
amount of buffer space or packet pointers to Queue 2.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
• Packet Pointer Range: 0 to 2047.
queue3
number
Enter the keyword queue3 and the number to allocate an
amount of buffer space or packet pointers to Queue 3.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
• Packet Pointer Range: 0 to 2047.
Defaults none
Command
Modes
BUFFER PROFILE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
buffer-profile (Configuration) — creates a buffer profile that can be applied to an
interface.
Debugging and Diagnostics
467