Defaults Disabled.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
By default, the sytem implements an optimized flush mechanism for MSTP. This
mechanism helps in flushing the MAC addresses only when necessary (and less
often) allowing for faster convergence during topology changes. However, if a
standards-based flush mechanism is needed, this knob command can be turned
on to enable flushing MAC addresses after receiving every topology change
notification.
Multiple Spanning Tree Protocol (MSTP)
911
To Next Page
Loading...
