Leader LV5300A - Page 140

6. BASIC OPERATION
123
• ALL - ---
CH - MAIN/SUB1/SUB2/SUB3
ITEM - LAYOUT-1/LAYOUT-2 and the like
Selects the target items when you select items with << and >>.
If you select ALL, all items of all channels are selected in order.
If you select CH, all items of the selected channel are selected in order.
If you select ITEM, the selected items of all channels are selected in order.
• <<, >>
Selects the items specified by ALL/CH/ITEM in order. You can select an item by clicking
it directly, but this is useful when items are overlapped and you want to select items in
the back.
Moving by dragging, COPY, DELETE, and TOP can be used on selected items.
• TOP
Moves the selected items to the front.
8 DELETE
Deletes individually selected or grouped items.
If the Ctrl tab is displayed, individually selected items can only be deleted if they are
part of the ALL/CH/ITEM target.
9 ALL CLEAR
Deletes all items.
10 DEFAULT LAYOUT
Resets the layout to factory default.
11 Item name
Displays the selected item name.
12 x0, y0, x1, y1
Set the position and size of the selected item.
The coordinates at the upper left corner of the screen are (0, 0). Those at the lower
right corner are (1920, 1080). Based on these references, the coordinates of the upper
left corner of the item is (x0, y0), and those of the lower right corner is (x1, y1).
You can change the values using the ▲▼ key or the wheel on the mouse.
13 Grid Size: 10x10 / 30x30
Select the grid size.
The position and size of items snap to the grid specified here.