3. SPECIFICATIONS
42
Data Dump Display
Display Format Displays serial data sequence or displays each color
component separately
SD, HD, 3G-A PICTURE, stream 1, stream 2
3G-B-DL PICTURE, link A, link B
3G(DL)-4K (SER28) PICTURE, link 1, link 2
6G (SER28), 12G (SER28)
PICTURE, sub 1, sub 2, sub 3, sub 4
Display Format Details
PICTURE Links or streams 1 and 2 are combined and displayed in a
picture structure.
Stream 1/2 Displays each stream in a transmission structure
Link A, B, 1, 2, 3, 4 Displays the selected link
Line Select Displays the selected line
Sample Select Displays from the selected sample
Jump Feature Jumps to an EAV or SAV
Data Output Text output to USB memory
Phase Difference Display
Function Displays the phase difference between a reference signal and
an SDI signal numerically and graphically
Reference Signal
SD, HD, 3G-A, 3G-B-DL
external sync signal, Ach
3G(DL)-4K (SER28) External sync signal, Ach
6G (SER28), 12G (SER28)
External sync signal
Display Range
Vertical 1 frame
For 3G-B-DL 47.95P to 60P, ±1 frame measurement possible
Horizontal ±1 line
* If the reference signal is set to an external sync signal, the measured phase may vary by ±1
clock depending on the timing when the external sync signal or SDI signal is connected or
disconnected or when the power is turned on and off.
SDI Ancillary Data List Display
List Display Details Presence or absence of each ancillary data type, embedded
line number, and number of packets per frame
Dump Display The selected ancillary data is displayed in hexadecimal or
binary.
EDH Display (Only for SD)
Supported Standard SMPTE RP 165
Displayed Contents Analyzes and displays EDH packets and displays received CRC
errors
Display Format Text, hexadecimal, binary
To Next Page
Loading...
