Leader LV5300A - Page 128

6. BASIC OPERATION
111
18 STATUS - Standard
Selects the display mode of the STATUS item. Select the mode before clicking or tapping
the STATUS item.
STATUS ALL (*1)
This is the normal status display. The display switches between
error count, data dump, etc.
It cannot be arranged with the items below at the same time. If you
want to arrange the items below, delete this item first.
STATUS ERROR
Error counts are displayed.
DATA DUMP
Data dump is displayed.
EVENT LOG
The event log is displayed.
EXT REF
Phase differences are displayed.
AV PHASE
Lip sync is displayed.
ANC PACKET SUMMARY
A summary of ancillary pockets is displayed.
ANC
One of the following is displayed.
• STATUS EDH: EDH Display
• STATUS PAYLOAD: Payload ID Display
• STATUS CONTROL: Audio control packet display
• STATUS ARIB CC: Closed Caption Display
• STATUS ARIB NETQ: NET-Q display
• STATUS ARIB TRIG: Data trigger display
• STATUS ARIB USER1: User data 1 display
• STATUS ARIB USER2: User data 2 display
• STATUS SMPTE SR Live: SR Live display
• STATUS SMPTE 608: EIA-608 data display
• STATUS SMPTE 708: EIA-708 data display
• STATUS SMPTE AFD: AFD Display
• STATUS SMPTE PROG: Program data display
• STATUS SMPTE VBI: VBI data display
• STATUS SMPTE SCTE104: SCTE-104 display
• STATUS SEARCH: Ancillary packet search display